Changing your car’s oil is an essential part of vehicle maintenance, and it’s something that you can do yourself to save money. In order to do an oil change properly, however, you need to have the right equipment. One key piece of equipment is a set of car ramps. In this article, we’ll provide a comprehensive guide on how to use car ramps for oil changes. We’ll also review some of the best ramps on the market so that you can find the perfect set for your needs!
Car ramps: why use them?
Car ramps provide another way to lift up your car without having jacks or stands at all. They’re designed specifically with changing fluids in mind and they’ll make life much easier when trying to get underneath a lowered truck bed or SUV body style (like SUVs). These tools come in different lengths so pick accordingly depending on how high off ground level will be once completed.
Benefits of Using Car Ramps for Oil Change
Car ramps make it easier to access the vehicle. They are designed with a slope that allows you to slide under your car without jacking it up first. This means less time spent getting ready for an oil change and more time actually doing the job!
Safety First
While changing tires or brake pads, there’s always a risk of falling off the jack stand and hurting yourself if not careful enough when working on either side of vehicles’ wheels. It can be dangerous too because large trucks tend to weigh more than smaller cars do so they require more power from hydraulic lifts which may result in accidents due excessive pressure applied during lifting procedures – especially when placed incorrectly underneath frames before being raised into position properly (like SUVs). With Car Ramps, there is no such risk because these ramps are designed specifically with changing fluids in mind; therefore, they’ll make life much easier when trying to get underneath a lowered truck bed or SUV body style (like SUVs).
Portable and easy to store
No Back Pain
The days of having to strain your back trying to reach tight spaces underneath the car are gone. With ramps, you can easily drive the car up and onto them, making it easy for you to work on the oil change yourself. This is especially helpful if you have a bad back or joint pain.
No Muscle Strains
Similarly, you won’t have to worry about any potential muscle strains from trying to lift up the car. Car ramps do all the work for you, so all you have to do is slide under and get to work.
Safe and Secure
Car ramps are designed to be safe and secure. They come with a locking system that prevents them from slipping out or falling over while you’re working on the oil change. This means no more worrying about damaging your vehicle, yourself, or anyone else around when trying to perform routine maintenance tasks such as changing tires! There’s also less risk of someone getting hurt by being hit with heavy equipment if they get too close during lifting procedures – especially when placed incorrectly underneath frames before being raised into position properly (like SUVs).
Easy Maintenance
Car ramps do not require any power source. They can be used anywhere and at any time as long as you have access to the vehicle. This means no more worrying about running out of battery on your car jack during an oil change! It also makes it easy for people who need their cars serviced while traveling away from home – just use some rocks instead if there isn’t enough room inside garage space available nearby where repairs need taking place too often by professionals working around town all day long doing maintenance tasks like tire rotation services which require jacks that take up more space than ramps do (especially when placed incorrectly underneath frames before being raised into position properly).
How to Use Car Ramps
Now that you know more about the benefits of car ramps, let’s talk about how to use them. The following are some steps for using a car ramp set in your garage or driveway:
If you have a two-car garage, park one car in the garage and use the other space to change the oil on your vehicle. This will give you more room to work and prevent spills from dripping onto the ground.
Place your car ramps in front of your parked car so that they form a “V” shape. The open end of the V should be pointing towards the front of your car.
Slowly drive your car up onto the ramps until it is completely sitting on top of them. Make sure that all four tires are resting on top of the ramps; if not, back down and try again.
Now that your car is safely elevated, remove the engine oil cap and place it aside. Be sure not to lose it!
Let the old engine oil drain out into a container for later disposal. You may need to wait up to 15 minutes before all of the oil has drained from your car’s engine block and pan. After that, you can replace your car’s engine with new oil.
Car ramps for sale – what to watch for
There are a few things you should always keep in mind when using car ramps: capacity, ground clearance, dimensions, and weight. Capacity is important because the ramp must be able to hold the weight of your car; make sure to choose a set of ramps that are designed for your vehicle’s weight. Ground clearance is also key – if the ramp isn’t high enough, your car may not make it up onto them. Pay attention to the dimensions of each ramp so they’ll fit into your garage without taking up too much space. Finally, consider the weight of your car before purchasing a set of ramps – if they’re not heavy-duty enough, they may break under the strain.
How to stop car ramps from sliding?
To stop car ramps from slider on the floor, there are three things you can do. One is to make sure they’re on a level surface with no debris around them (this will help keep them from sliding). Two – use anti-slip tape or non-slipper rubber mats under each ramp leg for extra grip where needed most; this way if one ramp starts slipping it won’t affect all of your other ramps too much at once! Finally, don’t forget about using wheel chocks which go in front of both ends when doing maintenance work so that even if there was some type of accident happening while changing fluids inside an engine compartment – these ramps wouldn’t slip away underneath itself causing serious damage.
What size car ramps should I buy?
What’s the difference between a car ramp and a floor jack?
The main difference between a car ramp and a floor jack is that ramps are meant to be driven onto while jacks are placed underneath each tire respectively in order to lift the entire chassis of the vehicle off the ground (this is usually done when changing tires). Car ramps can also come in handy when working on an engine compartment because it gives you easier access – as long as there’s enough clearance for your car to fit on top of them without scraping or bumping into anything on the way up. Floor jacks, although safer, require more skill and take longer since they need to be precisely positioned under each tire; if one side isn’t even with the other then you may end up damaging your suspension system or worse yet- crashing through weak floorboards!
How do I use car ramps for oil change?
To use a set of car ramps, first make sure they’re placed on a level surface with no debris around them – this will help keep the ramp from sliding away underneath itself causing serious damage. Then drive slowly but steadily onto each ramp until your vehicle’s weight rests securely atop both sides (it should feel like it’s resting comfortably rather than being strained). Once that happens just continue lifting as needed until reaching desired height at which point an engine compartment can now be accessed easily without worrying about hitting anything overhead while working under there.
How much do car ramps for oil change cost?
Car ramps can vary in price depending on their size and material. The larger the ramp, the more expensive it will be. They also come with different types of materials like steel which is heavier but stronger than aluminum or plastic (some have both these materials mixed together). For example, if you’re looking to get one that’s big enough so your whole engine fits comfortably without having any trouble reaching anything inside then expect pay somewhere between $200 – 300 dollars whereas smaller ones may only cost around $50-$60 apiece. If needed there are cheaper alternatives such as using pieces cut out from cardboard boxes placed underneath each wheel instead though they won’t last nearly as long nor protect against rain snow etcetera.
What’s the best car ramp for oil change?
If you’re looking for a cheaper alternative then check out the Torin T-90390 Race Ramps which are made entirely from durable plastic and can be purchased for around $50. They might not last as long as some of the other options on the market, but they do the job just fine and are perfect if you don’t plan on using them too often or need something to take with you while travelling.
Conclusion
Car ramps offer a much easier way to change oil when working under an automobile chassis when compared to floor jacks. Not only do they save time in terms of set up, but they also prevent any damage that could be caused by incorrect usage of a jack. Car ramps come in many different shapes and sizes, so it’s important to do some research beforehand in order to find the perfect set for your needs. They’re also perfect for people who want to avoid potential back pain, muscle strains, and accidents while working on their car. Happy motoring!